December30

Jobsite Winter Safety

By John Howell

1. Be aware of weather forecasts. Keeping track of the forecast for the day is the first step for keeping your workers warm. A worst-case scenario is that an employer sends workers out to a job site the day a blizzard blows into town. Employers should watch the local weather and check the National Weather Service. Know when temperatures and conditions could make outside work dangerous. If possible, you can also schedule work during the warmest part of the day.

2. Limit exposure to the elements. When the wind and snow are blowing and temperatures are dangerously low, schedule outside work in shorter time blocks. Consider breaking up larger projects into smaller tasks or providing short, frequent breaks in a warm environment such as a heated trailer or a tent with portable heaters.

3. Require proper gear. Working outside during the winter requires the right gear for the job, including boots, heavy coats, gloves, hats and other essentials based on the weather. Employers should require all workers to wear clothing that will keep them warm and dry to prevent hypothermia and frostbite. Also, shoes should have nonslip soles to prevent falling.

4. Review work sites every day. Any kind of debris can pose a risk in work environments, however, it is particularly true for winter construction. Snow and ice on overhangs and rooftops should be regularly cleared to prevent falling to the ground level. It must be kept in mind that snow can hide dangerous materials that can fall to a lower level and injure a worker.

5. Remove snow and ice. Before work is started on a site, employers should ensure snow is removed, salt or sand is put down and large patches of ice are chipped away. And, no matter how time sensitive the construction job is, workers should avoid working on scaffolding in ice and snow.

6. Inspect and prepare vehicles. Before heading into the winter, all work vehicles should be inspected to determine if they are fully functioning. Employers should also add winter emergency kits to work vehicles. These kits should include an ice scraper, snow brush, shovel, tow chain, flashlight with extra batteries, emergency flares, a blanket, snacks and water.

7. Educate workers on the signs of frostbite and hypothermia. Even when employers do everything they can to protect workers, issues can still arise. Supervisors and workers need to know the symptoms of hypothermia and frostbite so that if anyone shows these signs, they can receive immediate medical attention. When workers know what to look for, it’s more likely they will seek medical treatment sooner

NOTE: Always promote a discussion on any of the topics covered in the Tool Box Talks. Should any question arise that you cannot answer, don’t hesitate to contact your Employer.

Shepformation... The Shepley Newletter

  • Civic Rent: Beer for a Good Cause

    Where to Buy Civic Rent is a limited edition lager

    Read More
  • COVID-19 Response & Updates

    At Shepley, nothing is more important to us than t

    Read More
  • Electrical Strip Safety

    By John Howell There were several fires caused by

    Read More
  • Step by Step

    By Nick Crowley Step up your trim game with a mode

    Read More

Newsletter Sign Up

Central Location:

Hyannis Office

216 Thornton Drive, Hyannis, MA 02601
Phone: 508-862-6200
Toll-free: 800-227-7969
Facsimile: 508-862-6012
Directions

Shepley Showcase

75 Ben Franklin Way, Hyannis, MA 02601
Phone: 508-862-6228
Toll-free: 877-909-7227
Facsimile: 508-862-6047
Directions

Nantucket Office

6 Lovers Lane, Nantucket, MA 02554
Phone: 508-325-0400
Facsimile: 508-325-0359
Directions

Wellfleet Office

2238 Route 6, Wellfleet, MA 02667
Phone: 508-349-2280
Facsimile: 508-349-3078
Directions