July23

Toolbox Talks: Extension Cords

By John Howell

Extension cords are everywhere

Extension cords can be found in nearly all vocational settings due to the widespread use of electronic equipment and electrically powered tools. They are more susceptible to damage than fixed wiring because they are exposed, flexible, and unsecured. The normal wear and tear on extension cords can loosen or expose internal wires and create hazardous conditions. Extension cords are intended for temporary use only and are not intended to replace fixed wiring. Three prong wire cords that have not been extensively used and that are not modified represent less of a risk of electric shock.

Cord damage
  • Extension cords can be damaged by doors, window edges, staples, fasteners, abrasion from adjacent materials, and simple aging.
  • If the electrical conductors become exposed there is a high risk of injury due to electric shock and fire.
Grounding
  • Extension cords must be a 3-prong type, which will provide grounding of the equipment being used.
  • Never use an extension cord with a missing or damaged ground prong.
Wet conditions
  • When a cord connection is wet, electrical current can leak from a hot wire to the grounding conductor and to whoever handles that connection.
  • Such leakage can occur, not just on the face of the connector, but at any wet portion.
  • Limit the exposure of cords, connectors, and tools to excessive moisture by using water-tight or sealable connections.
  • The use of ground-fault circuit interrupters (GFCIs) greatly reduces the danger inherent in exposure to water and is advised for all applications.
Avoid hazards
  • Use factory-assembled cords that are properly rated for the application.
  • Use only extension cords that are a 3-prong type.
  • Use only extension cords that are marked with a designation of heavy or extra-heavy usage.
  • Use only cords, connection devices, and fittings that are equipped with strain reliefs.
  • Remove cords from receptacles by pulling on the plugs and not on the cords.
  • Conduct regular cord inspections. Any damaged, unmarked, or modified cords should be cut up and thrown away.
  • Use GFCIs at all times.
  • Only use extension cords for temporary applications. Long term electrical use requires fixed wiring.
Inspection
  • Inspect and test all cords before use.
  • Do not use a damaged cord.
  • Implement a test and implement a ground assurance program for everyone’s safety!

Shepformation... The Shepley Newletter

  • NYLE Robert J. Horne Jr. CHIPS Award

    The Northeastern Young Lumber Execs (NYLE) recentl

    Read More
  • Hip To be Square

    By Nick Crowley Oak Point 9200 Modern Square Notch

    Read More
  • The Care of Hand Tools

    By John Howell Hand tools are used every day on a

    Read More

Central Location:

Shepley

216 Thornton Drive, Hyannis, MA 02601
Phone: 508-862-6200
Toll-free: 800-227-7969
Facsimile: 508-862-6012
Directions

Shepley Showcase

75 Ben Franklin Way, Hyannis, MA 02601
Phone: 508-771-7227
Toll-free: 877-909-7227
Facsimile: 508-771-7044
Directions

Nantucket Office

6 Lovers Lane, Nantucket, MA 02554
Phone: 508-325-0400
Facsimile: 508-325-0359
Directions

Wellfleet Office

2238 Route 6, Wellfleet, MA 02667
Phone: 508-349-2280
Facsimile: 508-349-3078
Directions